Vistamation, Inc.888-884-0939
BBB Rating

Verified by MerchantCircle





Cantilever racks are the perfect solution for storing sheet and bar stock, furniture and pipe. It is suited to industrial environments, and is frequently seen in outdoor storage yards, with lumber, sheet steel and pipes are stored.


  • Starter- A complete, stand alone cantilever rack system consisting of 2 upright columns, a minimum of 2 arms, and one brace set for spacing.

  • Add-On - An additional part of a cantilever rack consisting of only 1 upright column, a minimum of 1 arm and a brace set for spacing.

  • Single-Sided - Cantilever rack with arms for storage on one side. Typically Single sided units are against the wall.

  • Double-Sided Cantilever rack - Cantilever rack with arms for storage on both sides.

  • Double-Sided Upright Column - when selecting cantilever rack, one must select either double sided uprights, which have a base that goes in both directions, allowing storage on both sides or

  • Single-Sided Upright Columns that have a base in one direction only, allowing storage arms on one side only.

  • Brace Sets - Used to create even, consistent spacing between upright columns. Can be as simple as a single bar on a short cantilever rack.

  • Arms - This is what holds your materials. Cantilever arms can be either straight, ideal for lumber storage or sheet steel, or inclined to prevent rolling, perfect for pipe storage or lumber storage.

  • Lip - on the end of cantilever arms, the lip is an optional piece on the end of cantilever arms that prevents rolling.

  • Base - The base of a cantilever upright column. It serves two purposes; First, it is the bottom beam that supports the upright and second, it is the bottom storage level of your cantilever.

Please see the bottom of this page for a more complete cantilever rack selection guide.


Serving Cantilever rack clients in: Atlanta Baltimore Boston Chicago Cleveland Dallas Denver Detroit Edmonton Houston Lexington Los Angeles Las Vegas Miami Minneapolis Montreal New York Pittsburgh Philadelphia Phoenix Portland Raleigh San Diego San Francisco Seattle St Louis Tampa Toronto Vancouver Washington DC 银河国际娱乐注册

Cantilever Rack System
Meco Standard-Industrial Grade Cantilever Rack System

Cantilever Rack Systems
Jarke Heavy-Duty Cantilever Rack Systems

Heavy Duty Industrial Cantilever Rack
Relius Heavy-Industrial Grade Cantilever Racks...

Jarke Cantilever Rack
Jarke Value Line Heavy-Duty Cantilever Racks...

Meco Cantilever Racks
Medium-Duty Cantilever Racks

Single sided cantilever rack system
Single Sided Cantilever Racks

Quiktree Rack
Quiktree&Reg; Light-Medium Duty Cantilever Racks

Meco Cantilever Rack
Meco Ultra-Capacity And Heavy-Inudstrial Grade Cantilever Racks....

Jarke Cantilever rack
Jarke High-Capacity Cantilever Racks...

Pipe Storage rack
Button-On Cantilever Rack

Steel Tubing Storage rack
Jarke Medium-Duty Cantilever Racks...

Heavy Duty Rack System
Jarke Value Line Heavy-Duty Cantilever Racks...

Sheet Steel Storage rack
Meco High-Capacity Cantilever Racks...

Lumber Storage rack
Jarke Standard-Industrial Grade Cantilever Racks...

Sheet steel storage rack
Relius Heavy-Industrial Grade Cantilever Racks...

Cantilever Racks
Rugged Cantilever Racks

Heavy duty cantilever racks
Jarke Heavy-Duty Cantilever Racks

Cantilever Racking
Button-On Cantilever Rack


Cantilever racks are ideal for storing long, rigid materials such as lumber, pipe, and bar stock. The racks can be front-loaded by hand or with a fork truck or can be used as side pick racks in space-conscious areas. This guide will help you through the ordering process by providing basic information needed to select cantilever rack.


A cantilever rack is configured per bay and consists of three general components: arms, columns, and brace sets.
1. Determine storage needs by taking into account the length, depth, height and weight of the product being stored.
2. Arms: Choose arm style and length, along with the capacity needed to support the load. Two arms (one on each side) create a level. Divide the weight of the load per level by two (for one bay) to give the individual arm capacity needed. (This assumes that the load is supported sufficiently by two arms to prevent load deflection).
3. Columns: Determine the number of arms needed per column side and vertical space required. Adding up all of the individual arm capacities and vertical space required will determine the height and combined weight capacity needed for the two columns.
4. Brace: Determine brace set width. Take into account the length of the pieces planned to be stored. Brace set widths will provide center-to-center measurements of the arms installed on columns. One brace set per bay is required.
1. Product to store: Pipes bundled at 8' long, 10" deep, weighing 2,000 lbs.
2. Arm choice: 12"L, straight, with lip. Load weight is 2,000 lbs. Divide weight by two (one level) to obtain 1,000 lbs. per arm requirement.
3. Column choice: Assuming four levels of load are required, then eight arms would be needed with vertical spacing of 18" apart. Eight arms x 1,000 lbs. capacity per arm = 8,000 lbs. Combined required column capacity (4,000 lbs. per column, single sided) at 8' high would be needed.
4. Brace: 8'L load with two-arm (one bay) support would require a 4' wide brace set.

Serving Industrial Equipment Clients in:银河国际娱乐网站注册ip地址 Austin, Atlanta, Baltimore, Boston, Calgary, Charlotte, Chicago, Columbus, El Paso, Dallas, Denver, Detroit, Edmonton, Houston, Indianapolis, Jacksonville, Los Angeles, Las Vegas, Louisville, Memphis, Miami, Montreal, Nashville, New York, Oklahoma City, Ottawa, Philadelphia, Phoenix, Portland, San Antonio, San Jose, San Diego, San Francisco, Seattle, St Louis, Tampa, Toronto, Vancouver, Washington DC & Throughout the Known World.缅甸银河国际娱乐注册